Kensington MP3 Docking Station M01039 User Manual

Wireless Docking Station  
INSTRUCTION GUIDE  
 
Step 2: Power Your Docking Station  
Your Life Just Got Easier  
1
Flip the antenna on the Docking Station up.  
No need to plug multiple peripherals into your notebook every time  
you return to your desk. Through one wireless USB connection, the  
Kensington Wireless Docking Station connects you instantly to your  
external monitor, keyboard, and other peripherals. The compact size  
and wireless functionality let you place the Docking Station in the most  
convenient location in line of sight with your notebook, while taking up  
minimal desk space.  
Please read this short manual to learn valuable information about the  
safe and proper use and installation of your Docking Station. Register your  
Docking Station online at www.kensington.com/register.  
System Requirements  
PC with the following specifications:  
Windows VISTA™ or Windows® XP with Service Pack 2 or higher,  
32 bit versions  
Certified wireless USB host device  
Note: If your notebook does not have an embedded wireless USB host  
device, you can purchase a wireless USB adapter (sold separately) to  
use as the host device.  
PC with 1.2 GHz or higher processor clock speed, with an Intel Core 2  
Duo or equivalent power CPU  
512 megabytes (MB) of RAM  
Super VGA (800 x 600) or higher resolution video adapter and monitor  
CD-ROM or DVD drive if installing from a CD  
Available USB port  
2
Plug the power adapter into the power adapter jack on the Docking  
Station. Then plug the power adapter into a working wall outlet.  
Step 1: Install the Software  
The Software Installation CD contains several software drivers. Drivers  
are software that allows the various components of your Docking Station  
to work.  
Important! You must install the software before you can use  
your Docking Station with peripheral devices. If you have  
a Kensington Docking Station and related drivers already  
installed on your notebook, we recommend that you uninstall  
the drivers before continuing with this procedure.  
Note: Be sure to check www.kensington.com for driver updates or  
enhancements.  
1
Insert the Software Installation CD into your notebook’s CD/DVD  
drive. The installation application opens automatically.  
Note: The power indicator light on the front of the Docking Station glows  
amber when the Docking Station is powered but is not connected to your  
notebook.  
2
Follow the onscreen instructions to install the software drivers.  
Note: During the installation of the video drivers, your notebook screen  
may go blank for a few seconds. This is a normal part of the installation  
process.  
Note: Always keep the Docking Station connected to the power adapter  
supplied with the product.  
3
If prompted on your notebook screen, reboot your notebook.  
4
 
5
(Optional) If desired, select the Device Name field and enter a new  
name for your Docking Station.  
Step 3: Associate Your Docking Station with Your  
Notebook and Establish a Wireless Connection  
You have two options for associating your Docking Station with your  
notebook and establishing the wireless connection:  
PIN association completes the association process wirelessly by  
entering a PIN code.  
Note: PIN association is not supported by all wireless USB computers/  
external adapters. Please use cable association if the PIN association  
option is not available.  
Cable association completes the association process using a one-time  
cable connection to the dock.  
Choose the method that is most convenient for you.  
Note: The command names and screens that appear in your notebook’s  
wireless USB manager may be different from the ones shown here. Please  
refer to the documentation provided with your Certified Wireless USB  
notebook or external adapter.  
6
7
Select the connection option you want:  
Automatic: Your Docking Station always connects with your  
notebook when the two devices are in range of each other.  
Prompt: You are prompted to connect your Docking Station with  
your notebook when the two devices are in range of each other.  
Making a PIN Association  
1
2
Open Wireless USB Manager on notebook.  
Manual: You manually connect your Docking Station with your  
notebook by right-clicking the icon and selecting Connect.  
On the Wireless USB Manager screen, click Add New Device.  
Click Finish. Once the Docking Station is successfully associated with  
your computer an icon will appear in the Wireless USB manager.  
The Docking Station will then connect automatically. The active  
connection is indicated by opposing green arrows over the icon.  
3
On the Wireless USB Device Setup screen, select PIN Association.  
Click Next.  
Note: The power/connection indicator light glows green when the  
wireless connection is established.  
4
Enter the PIN code found on the bottom of your Docking Station.  
Click Next.  
Note: The power/connection indicator light flashes green and amber  
during the association process.  
5
 
Note: The power/connection indicator light flashes green and amber  
during the association process.  
Making a Cable Association  
1
2
Open wireless USB manager on notebook.  
5
(Optional) If desired, select the Device Name field and enter a new  
name for your Docking Station.  
On the Wireless USB Manager screen, click Add New Device.  
6
Select the connection option you want:  
Automatic: Your Docking Station always connects with your  
notebook when the two devices are in range of each other.  
3
On the Wireless USB Device Setup screen, select Cable Association.  
Click Next.  
Prompt: You are prompted to connect your Docking Station with  
your notebook when the two devices are in range of each other.  
Manual: You manually connect your Docking Station with your  
notebook by right-clicking the icon and selecting Connect.  
7
8
Click Finish. Once the Docking Station is successfully associated with  
your computer an icon will appear in the Wireless USB manager.  
The Docking Station will then connect automatically. The active  
connection is indicated by opposing green arrows over the icon.  
Disconnect the USB cable from your Docking Station and your  
notebook.  
4
Attach the USB 2.0 cable to the mini-USB connector on your Docking  
Station.  
Note: The power/connection indicator light glows green when the  
wireless connection is established.  
Attach the other end of the cable to a USB port on your notebook. The  
software automatically begins the association process.  
6
 
Disconnecting the Docking Station  
Step 4: Use Your Docking Station  
You may connect devices to the appropriate port on the Docking Station  
while your notebook is running. A slight delay is normal before the  
notebook recognizes the new device.  
If you move your notebook out of range, the dock will become  
disconnected. If you selected “automatically reconnect” during the  
association step, the connection will return automatically once you are  
again within range.  
1
Plug device cables—mice, monitor, and so on—into docking station.  
Note: If the Docking Station is transferring data through one of its USB  
connections, wait until the data has finished transferring. If you are  
using a USB flash drive, we recommend that you use the Windows Safely  
Remove Hardware feature before disconnecting the flash drive.  
When the dock is disconnected, the external monitor connected to the  
docking station goes blank.  
Note: If the video output of the Docking Station is configured in Extended  
(dualview) mode (see “Video Modes,” below), then any open windows on  
the external monitor move to the primary notebook screen. When the  
Docking Station is reconnected to the notebook, the video output is again  
configured for Extended (dualview) mode with the external monitor.  
However, windows that were previously on the external monitor do not  
move back to that secondary monitor.  
Video Modes  
The Docking Station video output works in two modes:  
Extended (dualview)  
Clone  
2
(Optional) If monitor is connected, adjust display settings:  
a
b
c
Right-click Kensington icon in taskbar.  
Select Extended (dualView) or Clone.  
Select desired screen resolution.  
Note: When you position your Docking Station, the wireless connection  
works best if there is a clear line of sight between the Docking Station and  
your notebook, with no obstructions.  
Extended Mode (dualview)  
USB Ports  
Connect any USB device to any of the Docking Station’s five USB ports.  
Each port has a connection indicator light that shows the status of that  
port:  
When no device is connected to the port, the indicator light is off.  
Clone Mode  
If a device is connected to the port and the connection works properly,  
the indicator light glows green.  
By default, the Docking Station uses video output in Extended (dualview)  
mode.  
Note: If a USB device is connected to the Docking Station and does not  
work as expected, test the device by connecting it directly to one of your  
notebook’s available USB ports.  
Extended (dualview) Mode  
Extended (dualview) mode lets you split your display across the laptop  
screen and the connected monitor.  
Video Port  
Connect your monitor’s DVI cable to the DVI-I video output port on the  
Docking Station and to an external monitor. If your monitor has a VGA  
cable, plug the DVI-to-VGA adapter into the DVI output of the Docking  
Station, then plug the VGA cable into the adapter. The cable can be  
connected and disconnected any time without disconnecting the Docking  
Station from your notebook.  
In this mode you can drag and drop windows from one screen to the  
other. This provides a number of advantages to increase productivity:  
Read email on one display; open attachments on the other.  
Expand a spreadsheet across both monitors.  
For graphics editing, increase your working area by putting all the  
pallets and toolbars on the second display.  
You can adjust video settings to customize your use of the Docking  
Station; see “Adjusting Video Settings,” below, for information.  
Keep your desktop on the external monitor and watch a DVD on your  
notebook screen.  
Note: We recommend that you auto-adjust the external monitor once in a  
while to realign its settings with the video output of the Docking Station.  
Refer to your monitor’s user manual for instructions on how to do the  
auto-adjust procedure.  
When your Docking Station is in Extended (dualview) mode, the Extended  
(dualview) mode display indicator glows green.  
7
 
For Windows VISTA: Open the Control Panel, select Personalization,  
and then select Display Settings.  
Clone Mode  
Clone mode clones—creates an identical display—from your notebook  
screen to the external monitor. In Clone mode, the Docking Station  
automatically selects the settings (screen resolution, color quality, and  
refresh rate) for the external monitor that will allow the best resolution  
based on your notebook’s settings.  
For Windows XP: Open the Control Panel, select Display, and then  
select the Settings tab.  
Below is a list of refresh rates supported at various resolutions and color  
depths for the Docking Station video output:  
When your Docking Station is in Clone mode, the Clone mode display  
Supported Refresh Rate  
Resolution  
indicator  
glows green.  
16 bit color depth  
60, 72, 75  
56, 60, 72, 75, 85  
60, 70, 75, 85  
60, 75, 85  
60, 75, 85  
60, 85  
32 bit color depth  
60, 72, 75  
56, 60, 72, 75, 85  
60, 70, 75, 85  
60, 75, 85  
60, 75, 85  
60, 85  
Switching Video Modes using the dualview Button  
640 x 480  
To switch between Extended (dualview) and Clone mode, press the  
dualview button on the front of your Docking Station.  
800 x 600  
1024 x 768  
1280 x 768  
1280 x 800  
1280 x 960  
1280 x 1024  
1366 x 768  
1440 x 900  
1400 x 1050  
1600 x 1200  
1680 x 1050  
dualview button  
60, 75, 85  
60  
60, 75  
60  
60  
60  
60, 75, 85  
60  
60, 75, 85  
60  
60  
60  
During the switchover process, the two mode display indicators  
flash on and off alternately. When the switchover is complete, the  
display indicator for the selected mode glows green.  
1
2
On your notebook, right-click the Kensington icon in the taskbar.  
To change video modes, select Extended (dualview) or Clone.  
The switchover process can take a few seconds to complete. Be sure to  
wait until the process is complete so that the video output settings are  
fully adjusted.  
To deactivate the video output of the Docking Station, press and hold the  
dualview button for at least 3 seconds. The external monitor display turns  
off, and any windows that were displayed on the external monitor move  
to the notebook screen.  
When the video output of the Docking Station is deactivated, both display  
mode indicator lights turn off.  
When you press the dualview button again, the display returns to the  
last mode you were in. Applications previously displayed on the external  
monitor are not moved back to the external monitor from your notebook  
screen.  
Adjusting Video Settings  
For either Clone mode or Extended (dualview) mode, you can adjust one  
or more of the following video settings. In Clone mode, the settings apply  
to both your notebook screen and the external monitor; in Extended  
(dualview) mode, you can set separate settings for your notebook screen  
and the external monitor.  
Resolution refers to the number of pixels displayed onscreen  
horizontally and vertically. A higher resolution means that you can  
see more of your image on the screen without scrolling or panning.  
You can adjust the resolution for an external monitor in Extended  
(dualview) mode only.  
Color depth defines the number of different colors that can be shown  
on the screen at the same time. The greater the color depth, the  
better the picture quality.  
Rotation refers to the position of the image displayed onscreen  
relative to the original image. You can rotate the image 90 degrees  
right or left, or invert (flip) the image vertically.  
3
Adjust video settings by selecting any of the following menu items:  
Screen Resolution: Select one of the listed resolutions. For example,  
selecting 1280x1024 means that the video port provides video output  
of 1280 pixels by 1024 pixels. The listed resolutions are a combination  
of those supported by the Docking Station and those supported  
by the external monitor. If the external monitor does not provide  
information related to its supported resolutions, the list includes  
default resolutions for the Docking Station only.  
DualView Settings specify the position of the image on the external  
monitor relative to the image on the notebook screen in Extended  
(dualview) mode. You can position the extended monitor image to  
be to the right of, to the left of, above, or below the notebook screen  
image.  
Notes: Another common video setting is refresh rate. Refresh rate (also  
called vertical frequency) measures the speed that the entire screen is  
rescanned. Higher frequencies reduce flicker, because they light the pixels  
more frequently, reducing the dimming that causes flicker.  
8
 
screen is considered the primary display. You can change this in your  
Windows display settings so that a different monitor is the primary  
display.  
Note: If you change the DualView setting and then switch to Clone mode,  
when you return to Extended (dualview) mode the setting is retained.  
4
To deactivate the video output of the Docking Station, select Disable.  
Note: In Clone mode, the resolution of the external monitor is  
automatically set to best match the resolution of the notebook screen.  
You cannot modify the resolution of the external monitor; however, you  
can change the resolution of the notebook screen, which automatically  
adjusts the resolution of the external monitor. To change the resolution  
of your notebook screen, open the Display Settings on your notebook and  
click Advanced.  
Note: You can also deactivate video output by pressing the dualview  
button on the front of your Docking Station, as described in “Video  
Modes,” above. To turn video output back on, select Extended (dualView)  
or Clone from the menu, or press the dualview button. Any settings you  
had previously selected are retained.  
Color Quality: Select Medium (16-bit) or Highest (32-bit) color depth  
to change the color quality of the external display when in Extended  
(dualview) mode.  
If you use multiple Docking Stations with a single notebook—for example,  
one at work and one at home—the video settings for each Docking  
Station are saved when you disconnect the notebook. So you can have  
your Docking Station at work set up for Extended (dualview) mode while  
your Docking Station at home is configured for Clone mode, and those  
settings will be retained each time you use the Docking Station with your  
notebook.  
Likewise, if you use the Docking Station with multiple notebooks, the  
video settings you enter for each notebook are maintained.  
How Standby or Hibernate Mode Affects Devices  
Attached to the Docking Station  
Screen Rotation: Select Rotated Left, Rotated Right, or Inverted to  
rotate the view of the external monitor. Select Normal to return to  
the normal view.  
External Monitors  
When the Docking Station is connected to a notebook and an external  
monitor, if the notebook goes into Standby or Hibernate Mode, the  
external monitor display goes blank.  
Note: Depending on your notebook settings, the notebook might go into  
Standby or Hibernate Mode when you close the lid.  
When the notebook returns to an active state, the external monitor  
display keeps the same settings it had before the notebook went into  
Standby or Hibernate Mode. However, if the external monitor was set for  
Extended (dualview) mode, windows that were previously on the external  
monitor do not move back to that secondary monitor. Also, if the external  
monitor is in Extended (dualview) mode and the notebook requires a  
login after Standby or Hibernate Mode, the login screen appears on both  
the primary notebook screen and the external monitor.  
DualView Settings: For Extended (dualview) mode only, select  
Right, Left, Above, or Below to specify the position of the display on  
the external monitor relative to the position of the display on the  
notebook screen. The default is Right.  
Other Devices  
If another device is connected to a port on the Docking Station and the  
notebook goes into Standby or Hibernate Mode, that device will not  
function. For example, if you are using a USB port to connect an external  
USB device, the device will not be available until the notebook returns to  
an active state.  
Uninstalling the Wireless Docking Station  
To remove the video software driver and the Wireless Docking Station  
instruction guide from your computer, follow the steps below.  
1
2
On your notebook, click Start and select All Programs.  
Navigate to the Kensington Wireless Docking Station folder and  
select Uninstall.  
Note: We recommend that you restart your notebook after uninstalling  
the software.  
Note: The DualView Settings option you select for the external monitor  
display applies relative to the primary display. By default, your notebook  
9
 
2
Do the following for your operating system:  
Troubleshooting  
Windows VISTA: Select Choose what closing the lid does on the  
left-hand side column. Select the When I close the lid pull-down  
menu, and then select Do nothing.  
If your Docking Station does not operate as expected, first check these  
items to try and correct the problem. If the problem persists, please  
contact Kensington Technical Support. Contact information is provided in  
“Technical Support,” below.  
Windows XP: Select the Advanced tab. In the Power buttons  
section, under the option When I close the lid of my portable  
notebook, select Do nothing.  
General  
The display on my external monitor is blurred.  
The Docking Station Power Indicator is not “on” (amber or green).  
We recommend that you auto-adjust the external monitor once in a while  
to realign its settings with the video output of the Docking Station. This  
action should fix most of the issues related to the quality of the video on  
the external monitor. Refer to your monitor’s user manual for instructions  
on how to do the auto-adjust procedure.  
Check to be sure that the power adapter included with the Docking  
Station is plugged into the Docking Station and into a working electrical  
outlet. Do not use any adapters other than the one supplied with the  
Docking Station.  
My notebook will not “connect” to the Docking Station, and the  
light of the power/connection indicator light is amber.  
The external monitor connected through the Docking Station is  
flickering.  
Make sure that the notebook or wireless USB adapter is within 10  
feet of the Wireless Docking Station and that there are no objects  
obstructing the line of sight between them.  
Flickering is usually associated with CRT monitors caused by a low refresh  
rate. Always try and use the maximum refresh rate available:  
Make sure the wireless USB radio is on by checking the wireless USB  
manager.  
In Extended (dualview), increase the refresh rate of the external  
monitor.  
Make sure that the Kensington Wireless Docking Station has an icon  
in the wireless USB manager and that the status is “connected.”  
In Clone mode, increase the refresh rate of your notebook screen,  
which will in turn increase the refresh rate of the external monitor.  
If you continue to have problems with connecting, you can reset the  
dock to its original factory settings pressing and holding the reset  
button for 5 seconds using a paper clip. This will delete any previous  
associations the docking station has made to your computer and  
others. After resetting, you will have to redo the connection process  
described in Step 3 of the setup.  
You must use your Windows display settings to adjust the refresh rate.  
For supported refresh rates, see “Adjusting Video Settings,” above.  
Audio  
I cannot hear anything through my notebook speakers and my  
built-in microphone does not work after connecting to the Docking  
Station.  
Video Output  
The display on my monitor is blank.  
Some notebooks default to the USB audio when the Docking Station is  
connected, disabling your notebook’s built-in speakers and microphone.  
To enable the speakers and microphone:  
Make sure that the notebook connected to the Docking Station is  
running properly and is not in Standby or Hibernate Mode. When the  
notebook is in Standby and Hibernate Mode, the monitor display is  
always blank.  
1
2
Open the Control Panel and select Sounds and Audio Devices.  
Do the following for your operating system:  
Make sure that the power adapter is connected to the Docking Station  
and to a working power outlet. Make sure that the video cable is  
securely connected to the DVI-I video output and is secured with the  
fixing screws on both sides.  
Windows VISTA: Select the Playback tab, and then select a device  
that is not USB Audio. Select the Recording tab, and again select a  
device that is not USB Audio.  
Windows XP: Select the Audio tab, and then, under Sound  
Playback, select a device that is not USB Audio. Select the  
Recording tab, and again select a device that is not USB Audio.  
Make sure that the display drivers are installed following the steps in  
“Step 1: Install the Software,” above. The Kensington icon  
for the  
Docking Station should be visible in the taskbar.  
Note: You must close the application currently using the audio device and  
restart it to enable this change.  
Make sure that the video output has not been disabled. Press and  
release the dualview button, and see if the monitor display comes on.  
If the problem persists, disconnect the Docking Station from your  
notebook. Remove the power adapter from the Docking Station.  
Reconnect the power to the Docking Station.  
Technical Support  
Technical support is available to all registered users of Kensington  
products.  
When I am in Extended (dualview) mode and I play video clips, only  
one video clip only can be seen.  
Web Support  
In Extended (dualview) mode, you can use only one video playback  
application at a time. If you attempt to play multiple video clips, only one  
video clip is displayed. This also applies to web pages with embedded  
video clips: You cannot view multiple web pages on the external monitor.  
To view multiple web pages, move one to the notebook screen and the  
other to the external monitor.  
You may find the answer to your problem in the Frequently Asked  
Questions (FAQ) section of the Support area on the Kensington website:  
Telephone Support  
There is no charge for technical support except long-distance charges  
where applicable. Please visit www.kensington.com for telephone  
support hours. In Europe, technical support is available by telephone  
Monday to Friday 09:00 to 21:00 (Central European time).  
I cannot play video clips when in Extended (dualview) mode on a  
Windows VISTA notebook.  
Microsoft VISTA notebooks cannot play some types of video clips in  
Extended (dualview) mode. To play these video clips, move the display  
to your notebook screen. Video playback support in Extended (dualview)  
mode is updated on a regular basis with new drivers; check the  
Kensington website (www.kensington.com) for driver updates.  
Call from a phone where you have access to your Docking Station  
Be prepared to provide the following information:  
• Name, address, and telephone number  
• Name of the Kensington product  
• Make and model of your computer  
When I close the lid of my notebook, the display of the external  
monitor goes blank.  
• System software and version  
• Symptoms of the problem and what led to them  
By default, most notebooks go into Standby or Hibernate Mode when the  
lid is closed. To change this setting, do the following:  
Please call one of these numbers:  
1
Open the Control Panel and select Power Options.  
België / Belgique  
Canada  
02 275 0684  
1 800 268 3447  
10  
 
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the  
following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
MODIFICATIONS: Modifications not expressly approved by Kensington may  
void the user’s authority to operate the device under FCC regulations and must  
not be made.  
SHIELDED CABLES: In order to meet FCC requirements, all connections to  
equipment using a Kensington input device should be made using only the  
shielded cable provided.  
Denmark  
Deutschland  
España  
Finland  
France  
Hungary  
Ireland  
Italia  
México  
Nederland  
Norway  
Österreich  
Portugal  
Schweiz / Suisse  
Sweden  
United Kingdom  
United States  
International Toll  
35 25 87 62  
0211 6579 1159  
91 662 38 33  
09 2290 6004  
01 70 20 00 41  
20 9430 612  
01 601 1163  
02 4827 1154  
55 15 00 57 00  
053 482 9868  
22 70 82 01  
01 790 855 701  
800 831 438  
01 730 3830  
08 5792 9009  
0207 949 0119  
1 800 535 4242  
+31 53 484 9135  
TWO-YEAR LIMITED WARRANTY  
DECLARATION OF CONFORMITY COMPLIANCE STATEMENT FOR THE  
KENSINGTON COMPUTER PRODUCTS GROUP (“KENSINGTON”) warrants  
only to the original purchaser of this product from a Kensington-authorized  
reseller or distributor that this product will be free from defects in material  
and workmanship under normal use and service for two years after date of  
purchase. Kensington reserves the right, before having any obligation under  
this limited warranty, to inspect the damaged Kensington product, and all  
costs of shipping the Kensington product to Kensington for inspection shall be  
borne solely by the purchaser. In order to recover under this limited warranty,  
Purchaser must make claim to Kensington within 60 days of occurrence, and  
must present acceptable proof of original ownership (such as original receipt,  
warranty card registration, on-line registration, or other documentation  
Kensington deems acceptable) for the product. KENSINGTON, at its option,  
shall repair or replace the defective unit covered by this warranty. Please retain  
the dated sales receipt as evidence of the original purchaser’s date of purchase.  
You will need it for any warranty service. In order to keep this limited warranty  
in effect, the product must have been handled and used as prescribed in the  
instructions accompanying this warranty. This limited warranty does not  
cover any damage due to accident, misuse, abuse, or negligence. This limited  
warranty is valid only if the product is used with the equipment specified on  
the product box. Please check product box for details or call KENSINGTON  
technical support. This limited warranty is non-transferable and does not  
apply to any purchaser who bought the product from a reseller or distributor  
not authorized by Kensington, including but not limited to purchases from  
internet auction sites. This warranty does not affect any other legal rights  
kensington.com or at one of the technical support numbers listed below for  
warranty service procedures.  
KENSINGTON DOCKING STATION WITH VIDEO  
The Kensington Wireless Docking Station model no. M01039 complies  
with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may  
cause undesired operation. As defined in Section 2909 of the FCC Rules, the  
responsible party for this device is Kensington Computer Products Group, 333  
Twin Dolphin Drive, Redwood Shores, CA 94065, USA, 800-535-4242.  
This Class B digital apparatus complies with Canadian ICES-003.  
CE DECLARATION OF CONFORMANCE (DOC)  
The Kensington Wireless Docking Station model no. M01039 has been tested  
in accordance with essential requirements for CE marking. Kensington  
herewith confirms this product complies with all the requirements set  
out in the Council Directive on the application of the laws of the member  
states relating to the Electromagnetic Compatibility (89/336/EEC) and the  
amendments in the Council Directive 92/31/EEC and 93/68/EEC.  
For Europe, a copy of the Declaration of Conformity for this product may  
be obtained by clicking on the “Compliance Documentation” link at www.  
support.kensington.com.  
INFORMATION FOR EU MEMBER-STATES ONLY  
The use of the symbol indicates that this product may not be  
treated as household waste. By ensuring this product is disposed  
of correctly, you will help prevent potential negative consequences  
for the environment and human health, which could otherwise  
be caused by inappropriate waste handling of this product. For  
more detailed information about recycling of this product, please  
contact your local city office, your household waste disposal  
service, or the shop where you purchased the product.  
DISCLAIMER OF WARRANTY  
EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, TO THE EXTENT  
PERMITTED BY LAW, KENSINGTON DISCLAIMS ALL WARRANTIES, EXPRESS  
OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR  
FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED  
WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH  
WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. SOME  
STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.  
Kensington and ACCO are registered trademarks of ACCO Brands. Windows  
is a registered trademark of Microsoft Corporation. All other registered and  
unregistered trademarks are the property of their respective owners.  
© 2008 Kensington Computer Products Group, a division of ACCO Brands.  
Any unauthorized copying, duplicating, or other reproduction of the contents  
hereof is prohibited without written consent from Kensington Computer  
Products Group.  
LIMITATION OF LIABILITY  
REPAIR OR REPLACEMENT OF THIS PRODUCT, AS PROVIDED HEREIN, IS YOUR  
EXCLUSIVE REMEDY. KENSINGTON SHALL NOT BE LIABLE FOR ANY SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED  
TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, LOSS OR  
RECOVERY OF DATA, RENTAL OF REPLACEMENT EQUIPMENT, DOWNTIME,  
DAMAGE TO PROPERTY, AND THIRD-PARTY CLAIMS, ARISING OUT OF ANY  
THEORY OF RECOVERY, INCLUDING WARRANTY, CONTRACT, STATUTORY, OR  
TORT. NOTWITHSTANDING THE TERM OF ANY LIMITED WARRANTY OR ANY  
WARRANTY IMPLIED BY LAW, OR IN THE EVENT THAT ANY LIMITED WARRANTY  
FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL KENSINGTON’S ENTIRE  
LIABILITY EXCEED THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES/  
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION  
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS  
AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE  
AND PROVINCE TO PROVINCE.  
All rights reserved. 7/08  
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY  
INTERFERENCE STATEMENT  
Note: The Kensington Wireless Docking Station model no. M01039 has  
been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
11  
 
Kensington Computer Products Group  
A Division of ACCO Brands  
333 Twin Dolphin Drive  
Sixth floor  
Redwood Shores, CA 94065  
Designed in California, U.S.A.  
by Kensington  
Patents Pending  
Made in China  
901-2216-01  
KL  
 

Insignia Video Gaming Accessories NS TADPT1 User Manual
Intex Recreation Water Pump 634 User Manual
Invacare Mobility Aid M50TM User Manual
Jasco Security Camera 45406 User Manual
Kalorik Iron SIS 32968 User Manual
Kambrook Espresso Maker KES110 User Manual
Kenmore Vacuum Cleaner 11624194 User Manual
Kenwood Stereo Receiver KR 694 User Manual
KitchenAid Door KBAU302TSS00 User Manual
Kompernass Hair Care Product KH5527 User Manual